200099 HARDING

HARDING

PrisNOK1 677,00 inkl. mva.
Graveringstekst:
0 / 255 tegn
  • Produktinfo
  • Harding
  • Produktanmeldelser (0)
Detaljar Harding
Vekt 104 g
Stål Laminert rustfritt trelagsstål - Helle
Bladtjukkelse 3,1 mm
Bladlengde 100 mm
Konstruksjon Stikktange
Skaftmateriale Mørk eik, masurbjørk, rustfritt stål, lær
Lengde handtak 110 mm
Sliremateriale Ekte vegetabilsk lær
Designer Erling Opstad
Designår 1986

Harding representerer på mange måtar essensen i Helle. Då den kom i 1986 var den ein moderne vri av dei klassiske knivane med samansett skaft. Med sin kombinasjon av mørkt og lyst treverk sette Harding standarden for ein ny generasjon av knivar med samansette skaft. Og originalen er framleis ein av våre mest populære den dag i dag.

Det klassiske, tønneforma skaftet er laga av lag med mørk eik, lær, masurbjørk og ei framplate i rustfritt stål. Bladet er forma med ein liten drop-point, og er i vårt klassiske trelagsstål med ein høgpolert finish. Saman bidrar dette til at dette både er ein perfekt instagramkniv og ein påliteleg kniv som fungerer til alt du treng ein kniv til på tur.

Harding kjem i ei klassisk slire i brunt lær med ein ekstra søm og stropp som låser kniven fast i slira. *

Harding

The Harding is a traditional barrel handle hunting knife.

The beautiful, warm handle is made from curly birch and darkened oak separated by layers of leather. It has a full length tang. The blade is made of razor sharp triple laminated stainless steel. It comes with an embossed leather sheath with a handle butt retainer. A knife you will treasure.

Maintenance

Helle knives are designed to retain their sharpness as a lifelong outdoors companion. But it is still important to take care of your knife and its sheath.

The Handle. Dry the handle with a soft cloth if wet and wax occasionally.

The Sheath. The leather needs to be impregnated occasionally with colourless impregnation agent (grease or wax) to keep supple. Dry the sheath carefully in room temperature if it becomes wet.

The Blade. Wipe the blade with a soft cloth if wet and treat with grease occasionally.

Sharpening

Use a diamond tool or a wet stone for sharpening. Place the knife bevel flat to the sharpening tool and work the entire blade. Work one side until you can feel a slight burr on the opposite side. Switch side and repeat the procedure until you feel the burr on the first side. You have now established an edge.

Remove the burr by stroking the blade gently over the sharpening surface on both sides, as if cutting very thin slices. Keep the bevel flat towards the sharpener and move from side to side until the burr is gone.

If the blade is very dull or damaged, use a fine-grained grindstone and plenty of water and sharpen until you have a raw edge. Use much cooling liquid and never sharpen on a dry stone. A hot-ground edge looses its heat treatment and ruins the blade.

 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.